USB Pendant Button
For quotation requests or technical information, please contact us by e-mail. To visit us, see the address information page.
| Downloads: | Key Configurator 2.13 |
| Pawn Toolkit 1.0 | |
| USBHID SDK 1.7 |
The ‘USB Pendant Button’ is a hand-held switch on a USB cable. A press on the button sends a keystroke (or a mouse button click) to the workstation. You can configure which keystroke that is. You can use the USB Pendant Button to perform any command on the workstation: launch a presentation, start a show, pause or resume playback, or any other action.
The button has a robust metal casing, and is available with either a nickel-plated or (black) powder-coated surface.
The USB Pendant Button is recognized by the PC as a ‘keyboard’ —with only a single key. Microsoft Windows (and other operating systems) have intrinsic support for these devices. The USB Pendant Button runs out of the box, no driver is needed (on tablets with a USB ‘On-The-Go’ connection, an adapter-cable is needed).
Features
The USB Pendant Button is a robust hand-held switch on a 3 meter long cable. A ‘debounce’ circuit avoids false triggering and an ESD protection filter on the USB input guarantees a reliable operation.
As mentioned above, the PC or workstation recognizes the USB Pendant Button as a keyboard with one key. The key to transmit to the PC is configured via a free configuration utility, see the Downloads section. In addition to standard keys, that utility also allows you to configure a few extended functions, such as to function as a ‘play/pause’ button on a remote control, or as a mouse button. By default, the USB Pendant Button transmits the keyboard key ‘1’.
In addition to single-key transmissions, the USB Dome Button supports ‘macro commands’ which allow to transmit a sequence of key strokes to the PC, including key combinations with ‘Alt’, ‘Ctrl’ or ‘GUI’ shift modifiers. With a macro, a press on the button can start an application or open a web browser on a specific URL.
Multiple Pendant Buttons may be attached to a PC at the same time, with each Pendant Button (typically) configured to transmit a different key code.
Specifications
| Dimensions | Diameter: 19 mm, length: 77 mm. |
| Weight | 90 g (including cable). |
| Colour | Nickel-plated or black (powder-coated). |
| Mechanical lifetime | > 106 operations. |
| Operating temperature | -25 °C to +40 °C. |
| Actuation force | Approximately 5 N. |
| Cable | Length: 3 m, braided nylon sleeve. |
| USB connector | Standard A connector. |
| USB interface/profile | USB ‘HID’, keyboard profile, configurable key code. |
| Power supply | Powered through the USB connection. |
| Debounce criterion | 20 ms stable period. |
| Switch latency | 50 ms maximum, 35 ms average. |
| Feedback | Haptic feedback (vibration), configurable. |
Configuration & software control
Three options are available for configuring the USB buttons:
- The Key Configurator utility allows you set up basic configurations: key codes, haptic response, and temporary blocks. This is the simplest option, and suitable for most use cases. The utility is avaiable as a desktop application that you install on your system, or as an on-line (browser-based) tool.
- The pawn scripting engine embedded in the USB Pendant buttons allows you to download a user program into the buttons. This user program is more flexible than the basic configuration, and it enables you to create custom features or control. The pawn toolkit comes with two environments to develop the code: a standard IDE (in which you type source code) and a visual programming tool.
- When you develop your own desktop software, you can use the low-level SDK to make your software interact more directly with the USB Pendant buttons.
Accessories and variants
Application notes
- KeyConfigurator Usage Guide
- The guide to using the KeyConfigurator utility, to program the USB Dome Buttons, USB Pendant Buttons and Wireless Dome Buttons to a key or key sequence.
- Scripting the USB buttons
- The recent models of the USB Pendant Buttons support the pawn Scripting system, which enables you to deeper and more dynamic control of how the buttons respond to actions.
Downloads
- Key Configurator utility. See also the Usage Guide.
-
Microsoft Windows
Version 2.13
Apple macOS
Version 2.13
Linux
Version 2.13
- Pawn Scripting
-
Recent releases of the USB Buttons (with the exception of the battery powered
wireless buttons) include support for an embedded script. The script allows
for functionality that exceeds what can be configured with the
Key Configurator utility.
See the Application Note on pawn scripting for more information.Microsoft Windows
Version
Linux
Version
- USBHID SDK
-
The Software Development Kit for the ‘usbhid’ devices (which
includes these USB Pendant Buttons). This programmer's library allows you to
switch button illumination on and off under control of your own software, for example.
This SDK provides interfaces for C/C++, C# and VB.Net, for 32-bit and 64-bit
software (Linux is 64-bit only). Documentation is included.
Microsoft Windows
Linux
Version 1.7
- USB Pendant Button Specifications.
-
All systems
PDF file



